Fujitsu LIFEBOOK E5412 - Settings in BIOS Setup Utility; Starting the BIOS Setup Utility

Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOS SetupUtilitySetupS ystemconfigurationHardwareconfiguration
The BIOS S etu p Utility allows you to set the system functions and the hardware
configuration for the notebook.
When it is delivered, the notebook is set to factory default settings. You can
change these settings in BIOS Setup Utility. Any cha nges yo u make take effect as
soon as you save and exit the BIOS Setup U tility.
The BIOS Setu p Utility program contains the following men us:
Info
Displays information relating to the BIOS, processor and notebook
System
Advanced system settings
Advanced
Configuring various hardware parts such as USB ports, keyboards,
processors
Security
Password settings and security functions
Boot
Configuration of the start-up sequence
Exit
Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
► Start the devic
e (switch off/on or reboot the Operating System).
BIOSSetupUtility
► When switching on your device, press on fu nction key
F2
until the BIOS -Setup-Utility is displayed.
► If a password
has been assigned, enter the password and press the Enter key.
If you have fo
rgotten the password, contact your system administrator
or contact o
ur customer service centre.
The BIOS Setup Utility starts.
Instead of pressing function key
F2
, i f you press function key
F12
when switching
on your device, a boot menu with options will appear. You can use this to start
the system, also via othe r data sources, e.g. via a network.
You can also access the BIOS-Setup-Utility from the boot menu with the tab key.
Fujitsu 63