Troubleshooting and tips
Error message/c ause Resolution
Previous boot incomplete - Default configuration
used
Due to an error during the previous system boot,
default values were used for certain settings.
Check the settings in the BIOS Setup.
► Press the
F1
function key when prom
pted
to do so.
Real time clock error
► Contact your s ales outlet or
our customer
service centre.
nnnnK Shadow RAM failed
at offset: xxxx F ailing
Bits: zzzz
► Contact your sales outlet or our customer
service centre.
System ba ttery is dead - Replace and run SETUP
► Contact your sales outlet or our customer
service centre.
System cache error - Cache disabled
► Contact your s ales ou
tlet or our customer
service centre.
System ti mer error
► Contact your sales outlet or our customer
service centre.
Fujitsu 75
To Next Page
