41
- LIFEBOOK Application Panel Button
3 Click on Setup of LifeBook Application Panel. The Button Setting utility will appear. There are tabs that
correspond to the application buttons on the LIFEBOOK Application Panel. When you receive your notebook,
these buttons are pre-configured to launch specific programs, as referenced above.
To change an application associated with the Application buttons, click on the tab for the button you would
like to reconfigure. Click [Application registration...], then click the Select from Start Menu radio button.
Scroll down the list of applications and click on the one you wish to launch with this button, then click
[Next]. Select whether you want a sound when the program starts up, then select [Next]. Click [Finish]
and the button will now launch the new application.
The Internet tab is different. It comes set to launch your Windows default Internet browser (Internet
Explorer), unless you have changed this in Windows. In order to reconfigure it to launch another program
follow these easy steps:
When you have finished with Application Panel Setup click [OK], and the new settings will take effect.
You can reconfigure your LIFEBOOK Application Panel as often as you like.
Opening the Fujitsu Support Center with the Support Button
The Support button performs different actions when the system is off or when it is on.
When the system is booting, pressing the Support button will open the Fujitsu Start Boot Menu which
allows you to select Recovery and Utility to perform a number of other functions, including recovery of
your system.
After the operating system has been started, pressing the [Support] button invokes the Fujitsu Support
Center utility which offers three tabs: Manual, Diagnostic Program, and Support.
THE TABS IN APPLICATION PANEL SETUP MAY NOT BE IN THE SAME ORDER AS THE BUTTONS ON YOUR
LIFEBOOK
NOTEBOOK, PLEASE SELECT THE TAB YOU WISH TO CHANGE CAREFULLY.
To Next Page
Loading...
