51
- Starting Your LIFEBOOK Notebook
Installing ClickMe!
The first time you boot up your system, you will see an icon called Click Me! in the Start menu and on the
desktop. It is very important that you run the ClickMe! utility the first time you boot up in order to
ensure that the necessary applications, utilities. and drivers are installed. When you click the Click
Me! icon, your system will automatically create the related icons in the system tray in the bottom right of
the screen. These icons provide links to utilities that you will frequently access.
When you install the ClickMe! utility, several applications and utilities are installed; this takes time.
While ClickMe! is installing, the system may go into Suspend mode. If this should occur, slide the
Power/Suspend/Resume button momentarily to wake the system up. Alternately, while ClickMe! is
installing, slide your finger across the touchpad every few minutes to keep the system awake.
Registering your LIFEBOOK with Fujitsu
You can register your notebook by going to our website at: us.fujitsu.com/computers. You will need to be
set up with an Internet Service Provider (ISP) to register online.
BEFORE INSTALLING THE CLICKME! UTILITY, BE SURE THE WIRELESS LAN DEVICE IS ENABLED BY
PUSHING THE WIRELESS DEVICE ON/OFF SWITCH TO THE ON POSITION.
T
HERE MAY BE SOME THIRD-PARTY APPLICATIONS THAT DO NOT GET INSTALLED USING THE CLICKME!
UTILITY. FOR MORE INFORMATION, REFER TO YOUR GETTING STARTED GUIDE.
To Next Page
Loading...
