xii
Before moving the scanner, disconnect the power plug from the
power outlet. .
Turn OFF the scanner if it is damaged.
Do not place in wet areas.
■ Caution
Important cautions employed in this manual are as follows.
Do not touch the power cable with wet hands.
Always remove the plug from the socket before installing or
removing optional equipment.
Do not move the scanner with the power and interface cables
connected as this might damage the cables, causeing fire, electric
shock or injuries. Before moving the scanner, be sure to disconnect
the power plug from the power outlet, and disconnect data cables.
Also, make sure that the floor is free of obstructions.
If the scanner is damaged for any reason, turn off the scanner and
unplug the power cable before contacting the store where you
purchased the scanner.
Do not place the scanner where liquid spills may occur.
Do not touch the power plug with wet hands. Doing so might cause
electric shock.
Turn OFF the scanner and remove the power plug from the power
outlet, before installing or removing optional equipment in
accordance with the specified procedure.
Grip the plug to remove the power cable from the socket.
To Next Page
Loading...
Need help?
General