Fujitsu M3093GX Cleaning And Maintenance

● 29
3
Attach the Pad ASSY to the ADF in
the reverse sequence of step 3.
NOTE
Fit the Pad ASSY pin into the larger hole, then slide it to the right until it stops.
Close the ADF.
Reset the pad counter.
■ The following shows the procedure for resetting the pad counter.
• For Windows
®
98 / Windows
®
Me / Windows
®
2000 /
Windows
®
XP
1) When turning on the power, check that the scanner is connected to your PC.
2) Open the [Scanners and Cameras] from the [Control Panel] of your PC.
3) Open the [Properties] of [fi-4340Cdj] from the [Scanners and Cameras].
The [fi-4340Cdj Properties] dialogbox appears
"
#
$

Fujitsu M3093GX Specifications

General

Brand	Fujitsu
Model	M3093GX
Category	Scanner
Language	English