15
This concludes the scanner basic settings procedure.
HINT
When the scanner name or domain name has been
changed, the scanner is restarted.
If you select [No] for [Show the Installation Wizard at
next startup?], the [Installation Wizard] window does not
appear immediately after the next scanner startup.
HINT
The scanner basic settings can be changed by the following
methods:
Changing the settings on the [Installation Wizard]
window
To display the [Installation Wizard] window, press the
[Installation Wizard] button in the [Admin Menu] window
on the administrator window.
Changing the settings from the menu on the
administrator window
For details about how to show the administrator window,
refer to "Chapter 4 Checking the Network Connection" (page
16).
To Next Page
Loading...
Need help?
General