Fujitsu PRIMEQUEST 2400E3 - PRIMEQUEST 2400 E2;2800 E2;2800 B2 Features

CHAPTER 1 Product Overview
1.1 Introduction of the PRIMEQUEST 2000 series
2
CA92344-0534-07
PRIMEQUEST
2400E3 2800E3 2800B3
- Support of Dynamic Reconfiguration
(See, 5.9 Dynamic Reconfiguration
Function)
Supported Supported
Not
Supported
- Memory Scale-up Board (See, 5.5 Memory
Scale-up Board)
Supported
Not
Supported
Not
Supported
Virtualization support
- Support of Intel ® Virtualization Technology (VT-x, VT-d)
- Support of APIC virtualization (APICv)
Green compliance / Power saving
- Control of power optimization
- Control of the device cooling airflow with flap
- Optimization of cooling by group partition in the cabinet
- Support of power efficiency function (Optimal Power Allocation)
- Use of low consumption devices (LV-DIMM and SSD)
- Use of high efficiency power supply (80plus platinum)
- Precision control of cooling fan rotation speed
- Support of Power Saving function
- Compliance with RoHS regulation (2011/65/EU)
1.1.2 PRIMEQUEST 2400E2/2800E2/2800B2 Features
The features of the PRIMEQUEST 2400E2/2800E2/2800B2 are given below.
High reliability and high-performance
- Use of Intel ® Xeon ® processor E7 v3 product family
- SMP system with up to eight sockets (PRIMEQUEST 2800E2/2800B2)
High availability
- The following are supported as the memory functions.
- Bank DDDC
- Memory Patrol Scrub
- Memory Mirror
- Partial Memory Mirror
- Memory Sparing
- Support of degradation operation function so that the system can operate by isolating the faulty CPU
cores or SBs
- Support of hardware RAID
- Support of software RAID
- Support of Reserved SB functions
Operations support function
- Agentless (ServerView Agentless Service (SVAS)) hardware monitoring function