Fujitsu PRIMEQUEST 2400E3 - Vga; Memory Scale-Up Board; Memory Scale-Up Board Specifications; TABLE 2.8 Memory Scale-Up Board Specifications

CHAPTER 2 Hardware Configuration
2.6 Memory Scale-up Board
52
CA92344-0534-07
2.5.3 VGA
The VGA function is included in the BMC. Signals are output directly to the external VGA port of the SB. In a
partition configured with multiple SBs, the signals are only from the Home SB.
It is displayed in a maximum of 1600 dot x 1200 dot, 65536 colors.
2.6 Memory Scale-up Board
Memory Scale-up Board can be installed in only PRIMEQUEST 2400E3/2400E2. Up to three Memory Scale-
up Board can be included in one physical partition.
For details, see ‘2.1 Components’.
2.6.1 Memory Scale-up Board specifications
The Memory Scale-up Board specifications are listed in the table below.
TABLE 2.8 Memory Scale-up Board specifications
Item
Specifications
2400E3
2400E2
Memory
DIMM type
DDR4 RDIMM, LRDIMM, LV-RDIMM, LV-LRDIMM
Slot
48
Maximum capacity
6144GB(for 128-
GBDIMM/2CPU)
3072 GB (for 64 GB-
DIMM/2CPU)
Expansion
unit
Normal
Performance
2 DIMMs, 4 DIMMs, or 8 DIMMs (*1)
Full mirror
Partial mirror
4 DIMMs, 8 DIMMs, or 16 DIMMs (*1)
Address range
mirror(*2)
8 DIMMs or 16 DIMMs (*1)
Spare
6 DIMMs, 12 DIMMs, or 24 DIMMs (*1)
RAS
SDDC, Bank DDDC
Error correction
ECC
LED
Power, Alarm, Location
External dimension (mm) (excluding protrusions)
Width 90.5 x depth 528.1 x height 430.8
Weight (kg) (without HDD/SSD)
11.9
(*1) For details on the expansion unit of DIMM, see ‘G.2 DIMM’ in “PRIMEQUEST 2000 series
Administration manual” (CA92344-0537).
The following figure shows the overview of the Memory Scale-up Board.
(*2) Address range mirror is available in only PRIMEQUEST 2400E3/2800E3/2800B3.