Fujitsu PRIMEQUEST 2400E3 - Internal SSD; OPL (Operator Panel); TABLE 2.18 the SSD Capacity in Maximum Configuration and the Maximum LUN Capacity in a RAID Configuration

CHAPTER 2 Hardware Configuration
2.11 OPL (Operator panel)
62
CA92344-0534-07
RAID configuration
PRIMEQUEST Maximum LUN (*1)
2400E
2800E
2800B
1.2 TB HDD
SAS (non-RAID) 19.2 TB 28.8 TB 9.6 TB 1.2 TB
SAS-RAID (RAID0) 19.2 TB 28.8 TB 9.6 TB 4.8 TB (x4)
SAS-RAID (RAID1) 9.6 TB 14.4 TB 4.8 TB 1.2 TB (1+1)
SAS-RAID (RAID5) 14.4 TB 21.6 TB 7.2 TB 3.6 TB (3+1)
SAS-RAID (RAID6)
9.6 TB
14.4 TB
4.8 TB
2.4 TB (2+2)
SAS-RAID
(RAID10)
9.6 TB 14.4 TB 4.8 TB 2.4 TB (2x2)
SAS-RAID
(RAID1E)
9.6 TB 14.4 TB 4.8 TB 2.4 TB (4/2)
*1: Common in all models
2.10.2 Internal SSD
The SSD capacity in maximum configuration (*1) and the maximum LUN capacity in a RAID configuration
are listed in the table below.
*1:1.6 TB conversion for each SSD
TABLE 2.18 The SSD capacity in maximum configuration and the maximum LUN capacity in a RAID
configuration
RAID configuration
PRIMEQUEST
Maximum LUN (*1)
2400E3/
2400E2/
2400E
2800E3/
2800E2/
2800E
2800B3/
2800B2/
2800B
1.6 TB SSD
SAS (non-RAID)
25.6 TB
38.4 TB
12.8 TB
1.6 TB
SAS-RAID (RAID0) 25.6 TB 38.4 TB 12.8 TB 6.4 TB (x4)
SAS-RAID (RAID1) 12.8 TB 19.2 TB 6.4 TB 1.6 TB (1+1)
SAS-RAID (RAID5) 19.2 TB 28.8 TB 9.6 TB 4.8 TB (3+1)
SAS-RAID (RAID6) 12.8 TB 19.2 TB 6.4 TB 3.2 TB (2+2)
SAS-RAID (RAID10)
12.8 TB
19.2 TB
6.4 TB
3.2 TB (2x2)
SAS-RAID
(RAID1E)
12.8 TB 19.2 TB 6.4 TB
3.2 TB (4/2)
*1: Common in all models
2.11 OPL (Operator panel)
The OPL (Operator panel) provides following functions.
- System LED
LEDs that display the status of the System are mounted
- System FRU
The System FRU (I2C EEPROM) that stores the device information is mounted
- Intake air temperature sensor
A sensor to monitor the temperature of the intake air of the device is mounted