Fujitsu PRIMEQUEST 2400E3 - Bundled Software; Supplied Drivers; TABLE 3.1 List of Bundled Software

CHAPTER 3 Software Configuration
3.3 Bundled software
76
CA92344-0534-07
*3: For the details of the supported versions, contact the distributor where you purchased your product, or
your sales representative.
3.3 Bundled software
TABLE 3.1 List of bundled software
No. Name Function
Windows
Server
2012R2
Windows
Server
2012
Windows
Server
2008R2
RHEL SUSE
1
DSNAP
Collects the basic
information when the
command is executed
on Windows running
as the base OS
operation
Supported
Supported
Supported
Not
Supported
Not
Supported
2
Software Support
guide
Provides guidance on
collecting the
information required
for trouble shooting
Supported
Supported
Supported
Not
supported
Not
Supported
3
ServerView
Operations Manager
Monitors the
hardware
Supported
Supported
Supported
Supported
Supported
4
ServerView agent (SV
Agent)
Monitors the
hardware
Supported
Supported
Supported
Supported
Supported
5
ServerView
RAID Manager (SV
RAID)
Monitors the HDD for
failures and the RAID
status
Supported
Supported
Supported
Supported
Supported
6
HBA blockage
function
Stops access to
abnormal nodes
Not
supported
Not
supported
Not
supported
Supported
Not
supported
7
ServerView
Installation Manager
(SVIM)
Supports setup work
Supported
Supported
Supported
Supported
Supported
8
ServerView Mission
Critical Option
(SVmco)
Necessary when
linking clusters
Not
supported
Not
supported
Not
supported
Supported
Not
supported
9
ServerView Agentless
Service (SVAS)
Monitors the
hardware in the
partition unit.
Supported
Supported
Supported
Supported
Supported
10
Dynamic
Reconfiguration utility
Provides a set of
Dynamic
Reconfiguration
command user
interface and related
service scripts. And
also provides some
Dynamic
Reconfiguration
collaborate scripts.
Not
supported
Not
supported
Not
supported
Supported
Not
supported
Remark
To use monitoring with SVOM, installing ServerView Agents is required.
To monitor RAID by SVOM, installing ServerView Agents and ServerView RAID Manager (SV RAID) is
required.
To use PCL, installing HBA blockage function and SVmco is required.
3.4 Supplied Drivers
For the drivers supplied with PRIMEQUEST 2000 series, see below web site.
http://support.ts.fujitsu.com/