CHAPTER 1 Product Overview
1.3 PRIMEQUEST 2000 series configuration
12
PRIMEQUEST
2400E3 2800E3 2800B3
Number of installed MMBs 1 (Duplication is an option)
1 (Duplication not
supported)
Input voltage
AC200-240 V
Number of installed PSUs (maximum)
6
N+1, N+N (Dual power feed)
dimensions
[mm (in.)]
*1: Total number of SB and Memory Scale-up Board is up to four boards.
*2: Since supported CPU differs depending on PRIMEQUEST model, see ‘2.3.1 Support CPU list’.
*3: Since these values differ depending on CPU model, see ‘2.3.1 Support CPU list’.
*4: The case where Memory Scale-up Board is used in PRIMEQUEST 2400E3.
*5: When the maximum number of PCI_Boxes are connected.
*6: The KVM interface is provided for each SB (should not be always-on connection).
*7: Redundancy of MMB is supported in PRIMEQUEST 2400E3 and 2800E3. PRIMEQUEST 2800B3 does
not support MMB redundancy.
For details on the device specifications, environment conditions and power conditions of the PRIMEQUEST
2000 series, see PRIMEQUEST 2000 series hardware installation manual (CA92344-0535).
TABLE 1.2 Hardware specifications (PRIMEQUEST 2400E2/2800E2/2800B2)
PRIMEQUEST
2400E2 2800E2 2800B2
Number of mounted Memory Scale-up Boards
Number of mounted PCI_Boxes
Intel® Xeon® processor E7 v3 product family (*2)
:
:
DDR4-RDIMM, DDR4-LRDIMM, 8GB /16GB/ 32GB/
64GB
/12 TB (@64
12 TB (@64 GB)
1333 MT/s, 1600 MT/s, 1866 MT/s
Memory protection
function
ECC, SDDC, Bank DDDC
Partial mirror / Full mirror
1, 2, 3 rank spare supported
Maximum number of partitions (PPAR)
Dynamic Reconfiguration (DR)