Fujitsu Primergy RX100 S5 Start Guide

1





RX100 S5
1
Checking the items
supplied
Check the contents in the package using the
"Contents List". If any items are missing, contact
an ofce listed in the "Contact Information".
2
Reading and understand-
ing "Safety Precautions"
Before using this server, be sure to read and un-
derstand the attached "Safety Precautions".
Also check it when connecting, installing internal options
and setting up this server.
In the following case, do not install the internal options
before the OS has been installed.
- Custom Made Service
When installing internal options, perform operations after
reading the following manuals.

"Chapter 6 Installing Internal Options"

"PRIMERGY ServerBooks"/Supplement"
Install the following option devices after installing the OS.
Installing the OS after option devices have been installed
will cause the installation operation to end in an error.
- Non-system hard disks
- Internal SCSI optional devices (Backup cabinet, etc.)
3
Installing internal options
If internal options have been purchased separately, install them before installing the Operating System.
n
Available internal options and
installation locations
After installing internal options, check that the installation
order and location are correct and cables are correctly
connected.







n
SATA hard disk unit
This server has a model with a SATA hard disk installed. The SATA hard disk is designed to be used about eight hours per day
for ve years with small scale and comparatively low access frequency. Refrain from using for mission-critical tasks in which
continuous 24/7/365 operation is necessary, or database in which the access is frequently repeated, and high reliability is re-
quired.
To prevent the loss of important data, regular data backup is recommended.
n
PRIMERGY RX100 S5 Manuals
Manuals for this server are stored in the PRIMERGY Startup Disc.
Insert the PRIMERGY Startup Disc and click [PRIMERGY Manuals] on the [PRIMERGY Startup Disc] screen to refer to the
manuals.
The manuals can be read using Acrobat
®
Reader
®
or Adobe
®
Reader
®.
When using Acrobat
®
Reader
®
, use version 5.0 or
later.
B7FH-5131-01EN-00

Fujitsu Primergy RX100 S5 Specifications

General

Processor cache	1 MB
Processor cores	2
Processor family	Intel Pentium Dual Core
Processor frequency	2.2 GHz
Processor cache type	L2
Processor front side bus	800 MHz
Number of processors installed	1
Hot-swap	Yes
HDD interface	Serial ATA
Optical drive type	DVD Super Multi
Total storage capacity	0 GB
Memory slots	4
Internal memory	1 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	8 GB
Memory layout (slots x size)	1 x 1 GB
Networking features	Gigabit Ethernet
USB 2.0 ports quantity	5
Ethernet LAN (RJ-45) ports	3
Power supply	350 W
Power requirements	100 - 127V/200 - 240V@50 - 60Hz
Redundant power supply (RPS) support	No
Dimensions (WxDxH)	430 x 560 x 42.5 mm
Compatible operating systems	Microsoft Windows Server 2008/Server 2003, NovellSUSE Linux Enterprise Server, Red Hat Enterprise Linux
Chassis type	Rack (1U)
Operating temperature (T-T)	15 - 35 °C
Operating relative humidity (H-H)	10 - 85 %
Certification	GS CE CSAc/us ULc/us FCC Class A CB RoHS WEEE VCCI CCC C-Tick BSMI

Weight and Dimensions

Weight	12000 g