26 Operating Manual RX200 S7
Functional overview
Interfaces
Onboard or integrated controllers
USB connectors 6 x USB 2.0 (2 x front, 3 x rear, 1 x USSD)
Graphics (15-pin) 2 x VGA (thereof 1 x front optional)
LAN / Ethernet (RJ45) 2 x 1 Gbit/s Ethernet as default.
Modular On-Board LAN with upgrade options to 2 x
1 Gbit/s (RJ45), 4 x 1 Gbit/s (RJ45) or 2x 10 Gbit/s
(SFP+).
Management LAN
(RJ45)
1 x dedicated management LAN connector for
iRMC S3 (10/100/1000 Mbit/s).
Management LAN traffic can be switched to shared
onboard Gbit LAN connector.
Shared 10Gbit/s (SFP+) Management LAN as option
if Modular On-Board LAN 2 x 10 Gbit/s is configured.
Front management LAN connector as option.
RAID Controller RAID 5/6 Ctrl., HDD SAS 6 Gb, LSI , 8 ports ext.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache,
Optional BBU (based on LSI SAS2108).
Integrated RAID 5/6 Ctrl., HDD SAS 6 Gb, Fujitsu , 8
ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 1024 MB Cache,
Optional FBU (based on LSI SAS2208).
Integrated RAID 5/6 Ctrl., HDD SAS 6 Gb, Fujitsu , 8
ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache,
Optional BBU (based on LSI SAS2108).
Integrated RAID 0/1 Ctrl., SAS/SATA 6 Gb, Fujitsu ,
8 ports int.
RAID level: 0, 1, 10, No BBU support (based on LSI
SAS2008).
SATA Controller Intel C602, 1 x SATA channel for ODD
To Next Page
Loading...
