RX200 S7 Operating Manual 27
Functional overview
Slots
Drive bays
LAN Controller Intel Ethernet Controller I350, 2 x 10/100/1000
Mbit/s Ethernet (I/O acceleration) as default.
Modular On-Board LAN with upgrade options to
2 x 1 Gbit/s, 4 x 1 Gbit/s or 2 x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also
diskless).
Remote Management
Controller
Integrated Remote Management Controller
(iRMC S3, 32 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Trusted Platform
Module (TPM)
Infineon / separate module; TCG V1.2 compliant
(option)
PCI-Express 3.0 x8 3 x low profile
PCI-Express 3.0 x16 1 x low profile
Slot notes One PCIe Gen3 x8 slot may be occupied with a
Modular On-Board LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a
Modular RAID controller if configured.
Hard disk bay
configuration
4 x 2.5-inch or 8 x 2.5-inch
Accessible drive bays 1 x 5.25/0.5-inch for DVD/RW-Blu-ray (only for base-
unit 4 x 2.5-inch HDD)
Notes accessible drives all possible options described in relevant system
configurator
To Next Page
Loading...
