RX200 S7 Operating Manual 67
Starting up and operation
LAN indicators
Figure 9: LAN indicators
I Depending on the settings in the BIOS, the standard LAN connector 1
may also be used as a service LAN connector. You will find further
information in the "D3032 BIOS Setup Utility for PRIMERGY RX200 S7
Reference Manual".
No Indicator Description
1 LAN speed Steady yellow signal in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
2LAN
link/transfer
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
To Next Page
Loading...
