Fujitsu PRIMERGY TX150 S2 Configuration Guide

Type Mono-Processor Tower Server
Product ID PGQT1521G Pentium®4 3EGHz/1MB x 1, Memory: 512MB (512MB x 1), HDD: 73GB x 1/SCSI-10Krpm, CD-ROM
for Base Unit PGQT1523G Pentium®4 3.40EGHz/1MB x 1, Memory: 512MB (512MB x 1), HDD: 73GB x 1/SCSI-10Krpm, CD-ROM
PGQT1521A Pentium®4 3EGHz/1MB x 1, Memory: 512MB (512MB x 1), CD-ROM, no HDD
PGQT1523A Pentium®4 3.40EGHz/1MB x 1, Memory: 512MB (512MB x 1), CD-ROM, no HDD
CPU Frequencies Pentium®4 3.40EGHz/3EGHz x 1
Second-Level-Cache 1MB
Front-Side-Bus 800MHz
Chipset Intel®E7210
Memory Standard 256MB(256MB ECC DDR SDRAM DIMM x 1)
Maximum 4GB (1GB ECC DDR SDRAM DIMM x 4)
Graphics Controller ATI Range XL, VRAM:8MB (PCI)
Resolution 640x480/800x600/1024x768/1280x1024 dot
Internal Bays Number of Bays 4 (hot-plug)
3.5 inch Available HDD (Ultra320) 73GB(PG-HDH71K)
HDD 147GB(PG-HDH41K)
Maximum 587.2GB
Internal Bays 5inch 3 (2 free bays)
CD-ROM Option (Max 48 ATAPI)
PCI Slots PCI-X 64bit/66MHz (3.3v) 2 (Full Height x 2)
PCI 32bit/33MHz (5.0v) 3 (Full Height x 1)
RAID Controller Option
SCSI Controller Ultra320 SCSI x 1ch
Internal FDD 3.5inch (1.44MB/720KB)
Network Controller (On-board) 1 port (1000 BASE-T/100 BASE-TX/10BASE-T) x 1
Interfaces CRT (Analog RGB), Serial Port x 2 (D-SUB 9pins), Pararell Port (D-SUB 25 pins).
Keyboard (PS/2type Minl DIN 6pins), Mouse (PS/2type Mini DIN 6 pins), USB x3 (ver. 2.0)
Server Management Software ServerView
Power supply Voltage AC100V (50/60Hz) / 200V
Power consumption 330W /1188KJ/h (max.)
Redundant Power supply -
Power Consumption Efficiency Index (Watt/GB) Intel®Pentium®4 3.40EGHz: 0.014 / 3EGHz: 0.015
Dimension (mm) Pedestal: 205(W)x602(D)x444(H)
Rackmount: 440 (482 (incl. protruding parts))(W)x562 (597 (incl. protruding parts))(D)x221.2 (5U) (H)
Weight Pedestal: 27kg (max.) / Rackmount: 29kg (max.)
Environmental Conditions Temperature10-35°C / Humidity 20-80% (non condensing )
OS Support WindowsServer
TM
2003, Standard Edition/Windows®Small Business Server2003
Windows®2000 Server/Red Hat Enterprise Linux ES (v.3)
*Components installed as standard configuration marked in grey.
Data Sheet
PRIMERGY TX150 S2
Configuration Diagram
Power Supply
Unit
CPU
Pentium®4
3.40GHz/
3.0GHz(1MB)
PCI Slots
PCI5 32bit/33MHz
PCI4 32bit/33MHz
PCI3 64bit/66MHz
PCI2 64bit/66MHz
PCI1 32bit/33MHz
5 inchi Bay 3
5 inchi Bay 2
5 inchi Bay 1
CD-ROM Drive
3.5 inchi FDD
3.5 inch HDD Bay 4
(hotplug)
3.5 inch HDD Bay 3
(hotplug)
3.5 inch HDD Bay 2
(hotplug)
3.5 inch HDD Bay 1
(hotplug)
Memory
DIMM Slot 1 DIMM Slot 2 DIMM Slot 3 DIMM Slot 4
Bay 1
SCSI
Bay 2
SCSI
Bay 3
SCSI
Bay 4
SCSI
Hard Disk 3.5inch Bay (hotplug)
Standard Drive Cage

Fujitsu PRIMERGY TX150 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX150 S2
Category	Server
Language	English