Fujitsu PRIMERGY TX150 S8 Datasheet

Data Sheet FUJITSU Server PRIMERGY TX150 S8 Mono-Socket Intel® Xeon® processor server
Page 6 / 10 www.fujitsu.com/fts
Server Management
Standard ServerView Suite - Deploy
SV Installation Manager
SV Scripting Toolkit
SV Deployment Manager (30-day trial version)
ServerView Suite - Control
SV Operations Manager incl. PDA and ASR & R
(Prefailure and Analysis; Automatic Server Recovery and Restart)
SV Performance Management
SV Power Management
SV RAID Manager
ServerView Suite - Maintain
SV Remote Management (iRMC)
SV Update Management (BIOS, Firmware, Windows Drives and SV Agents)
SV Asset Management
SV Online Diagnostics
ServerView Suite - Integrate
SV Integration packs e.g. for Microsoft System Center, Nagios, HP, SIM, HP NNM, IBM Tivoli, Altiris
Deployment Solutions and others
Option ServerView Suite - Deploy
SV Deployment Manager (full version)
ServerView Suite - Maintain
iRMC Advanced Pack incl. Advanced Video Redirection (AVR) and Remote Storage
ServerView Suite - Dynamize
SV Virtual-IO Manager (VIOM)
SV Resource Orchestrator Virtual Edition (ROR VE)
SV Resource Orchestrator Cloud Edition (ROR CE)
ServerView Suite - Integrate
SV Integration pack for Fujitsu ManageNow® solution
Server Management notes Regarding Operating System dependencies and product details for ServerView Suite Software Products see dedicated
Product Data sheets.
Dimensions / Weight
Floor-stand (W x D x H) 177 x 651 x 456 mm
Rack (W x D x H) 483 x 611 x 177 mm
Dimension notes Floorstand Width 177 mm without tilt protection (420 mm with tilt protection); depth measured includes handles on
redundant PSU. Rack depth includes handles of redundant PSU, excludes rack handles / front.
Height Unit Rack 4 U
Weight 16 - 29 kg
Weight notes Actual weight may vary depending on conguration
Rack integration kit Rack integration kit as option
Dimensions / Weight / Environmental
(Base unit specic)
Environmental
Operating ambient temperature 10 - 35 °C
Operating relative humidity 10 - 85 % (non condensing)
Operating environment FTS 04230 – Guideline for Data Center (installation specication)
Operating environment Link http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Noise emission Measured according to ISO 7779 and declared according to ISO 9296
Sound pressure (LpAm) 22 dB(A) idle mode/ 22 dB(A) operation mode with low noise mode; 30 dB(A) idle mode/ 30 dB(A) operation mode
with SAS HDDs;36 dB(A) idle mode/ 36 dB(A) operation mode with HDD extension boxes;
Sound power (LWAd; 1B = 10dB) 4,0 B idle / 4,0 B operation mode with low noise mode; 4,8 idle mode/ 4,8 operation mode with SAS HDDs;5,4 B idle
mode/ 5,4 B operation mode with HDD extension boxes;
Noise notes Noise emissions and operation modes depend on system conguration.
Availability of the low noise mode depends on system conguration. To order an eligible system use the checkbox
“Enabling low noise mode” in System Architect.

Fujitsu PRIMERGY TX150 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX150 S8
Category	Server
Language	English