Modular RAID Controllers
7
1 Introduction
The PRIMERGY Modular RAID concept is designed to provide a flexible and
common RAID solution for the internal disks in all PRIMERGY servers and
consists of three different RAID solutions:
– Embedded RAID for SATA disks
– Entry RAID controller for SAS and SATA disks
– Full-featured RAID controller for SAS and SATA disks
1.1 Requirements
You will need hardware knowledge in order to install the board. To install the
software, you will need to be familiar with the operating system used.
1.2 Further information
Information on boards, drives and other devices can be found in the manuals
you received with these products.Information on your operating system and the
application programs you are using is contained in the associated manuals or
help texts.The latest information on our products, tips, updates, etc. can be
found on the Internet at: http://ts.fujitsu.com
For Japan please use the URL:
http://www.fujitsu.com/jp/products/computin g/servers/primergy/downloads/
To Next Page
Loading...
Need help?
General
