En-3
2.4. Decoration panel accessories
Name and Shape Q’ty Description
Connector cover
1
For covering connector
Screw
4
For mounting decoration
panel
Screw
1
For mounting connector
cover
2.5. Optional parts
Exterior
Parts name
Model No. Summary
Wired
remote
controller
UTB-*UD
Unit control is per-
formed by wired
remote controller
Air outlet
shutter
plate
UTR-YDZB
Install the plate at
outlet when carrying
out 3-way direction
operation
Wired remote controller is recommended using simultaneous
twin or triple connection.
2.3. Accessories
WARNING
For installation purposes, be sure to use the parts sup-•
plied by the manufacturer or other prescribed parts.
The use of non-prescribed parts can cause serious ac-
cidents such as the unit to fall, water leakage, electric
shock, or fi re.
The following installation parts are furnished. Use them as •
required.
Keep the Installation Manual in a safe place and do not dis-•
card any other accessories until the installation work has
been completed.
Name and Shape Q’ty Description
Coupler heat
insulation (Large)
1
For indoor side pipe joint
(gas pipe)
Coupler heat
insulation (Small)
1
For indoor side pipe joint
(liquid pipe)
Special nut A
(Large fl ange)
4
For installing the indoor unit
Special nut B
(Small fl ange)
4
For installing the indoor unit
Template
(Carton top)
1
For
positioning the indoor
unit
Remote
control unit
1
For air conditioner
operation
Battery
2
For remote controller unit
Remote control
unit holder
1
For installing the remote
controller unit
Screw
2
For mounting the remote
control unit holder
Binder
2
For electrical wiring
Wire clamper
1
For electrical wiring
(*1) This part is not furnished for AUT* series
To Next Page
Loading...
