Fujitsu ScanPartner SP25

Appendix
Appendix
Glossary
Introduction
Index
Contents
147
How to Load
Documents
Scanner
Overview
TOP
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Operational
Settings
A.1 Basic Specification
Item Specification Notes
ScanPartner SP25 ScanPartner SP30 ScanPartner SP30F
Scanner type ADF ADF ADF + Flatbed -
Image sensor Color CCD × 2
(front, back)
Color CCD × 2
(front, back)
Color CCD × 3
(front, back, flatbed)
-
Light source White cold cathode
fluorescent lamp × 2
(front, back)
White cold cathode
fluorescent lamp × 2
(front, back)
White cold cathode
fluorescent lamp × 3
(front, back, flatbed)
-
Available
paper size
Minimum ADF 52 × 74 (mm) / 2.05 × 2.91 (in.) -
Maximum ADF 216 × 355.6 (mm) / 8.5 × 14 (in.) (*1)
Flatbed - - 216 × 297 (mm) /
8.5 × 11.69 (in.)
-
Paper weight (thickness)
41 to 209 g/m
2
(11 to 56 lb)
127 to 209 g/m
2
(34 to 56 lb) for A8 size
1.4 mm or less for plastic cards
(*2)
Scanning
speed
(A4
landscape)
(*3)
Binary (black & white) Simplex: 25 ppm
Duplex: 50 ipm
Simplex: 30 ppm
Duplex: 60 ipm
300 dpi
Grayscale
Color
Loading capacity (*4) 50 sheets
Paper weight: 80g/m
2
(20 lb)
Total thickness: 5 mm or less
Optical resolution 600 dpi -