Fujitsu ScanSnap fi-5110C User Manual

CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
2.1 Turning the scanner ON
2.2 Loading Documents on the ADF for
Scanning
2.3 Scanning Documents
2.4 How to Use the Scanner Driver
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
2.4 How to Use the Scanner Driver(11)
10
11
12 13 14 15 16
Configure settings for scanning and click the [OK] button.
For details on this dialog box, refer to "
Configuration Window of FUJITSU ISIS Scanner
Driver".
The [Profile Editor] window appears. Click the [OK] button to return to [New batch] dialog.
Load the documents on the scanner.
Click the [Scan] button.
Scanned images are displayed on the window.
Refer to the "QuickScan Overview" or the "QuickScan Help" for further information on
functions and operations of QuickScan. After the installation of QuickScan, it is registered in
the [Start] menu.
10
11
12 13 14 15 16
CONTENTS

Fujitsu ScanSnap fi-5110C Specifications

General

Brand	Fujitsu
Model	ScanSnap fi-5110C
Category	Scanner
Language	English