Fujitsu ScanSnap iX500 - Page 16

l When an error window appears indicating that the wireless connection between the
ScanSnap and the computer failed, click the link in the displayed window and refer to the
details in the Help.
l If connection fails, check whether the ScanSnap and the computer are connected to the
same wireless access point. Note that the ScanSnap and the computer cannot be connected
to a wireless access point where the privacy separator such as a mobile router or a public
wireless LAN cannot be disabled.
l When connection fails even if the ScanSnap and the computer are connected to the same
wireless access point, refer to "When Connection to the ScanSnap Fails Even If the
ScanSnap Is Connected to the Same Wireless Access Point" (page 40).
l If connection cannot be set up manually, restart the wireless access point.
If connection still fails after the above operations are performed, refer to the ScanSnap Wireless
Setup Tool Help.
6. Check the contents on the displayed window and click the [OK] button.
7. Click the [No] button.
Network Connection
16