When Connection to the ScanSnap Fails Even If the ScanSnap Is
Connected to the Same Wireless Access Point
When connection fails even if the ScanSnap and the computer are connected to the same wireless
access point, connect the ScanSnap to the computer manually in the following procedure:
1. Right-click the ScanSnap Manager icon in the notification area located at the
far right of the taskbar, and in the displayed menu, select [Connect by Wi-Fi].
The ScanSnap selection window appears.
2. From the connection destination list in the ScanSnap selection window,
select the ScanSnap that is to be connected and click the [Connect] button.
Network Connection
40
To Next Page
Loading...
