EasyManua.ls Logo

Fujitsu ScanSnap iX500

Fujitsu ScanSnap iX500
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
l Even if the ScanSnap is connected to a computer via a USB cable, ScanSnap Connect Application
can be used for connection. When you exit ScanSnap Connect Application, the connection is
switched to a USB cable connection.
l The connection to the ScanSnap is automatically set up only when ScanSnap Connect Application
starts up.
To reconnect to the ScanSnap after ScanSnap Connect Application starts up, you need to manually
select the desired ScanSnap from the connection destination list in ScanSnap Connect Application
or to restart ScanSnap Connect Application.
Network Connection
25

Other manuals for Fujitsu ScanSnap iX500

Related product manuals