Fujitsu SE500 User Manual

Managing units of the SE server Managing hardware
220 U41855-J-Z125-3-76
10.1.4.9 Managing configuration data (CSR) of the MU
You use a CSR backup (CSR = Configuration Save and Restore) to back up the
configuration data of the Management Unit in an archive. The backup archive contains all
configuration data that the customer manages themselves via the SE Manager.
Each backup archive has a creation date and an archive name. The backup archive
contains MU-specific data (e.g. BS2000 devices or host name) and MU-global data (e.g.
accounts). When restoring the data from the backup archive, this distinction must be taken
into account.
i Recommendation: Perform a CSR backup after every configuration change. In a
single-MU configuration, you can use a CSR backup to recreate the configuration
of the unit as of the time of the backup. In a multi-MU configuration, there is a
difference between MU-specific and MU-global data (see the Important
information under “Restoring configuration data from a file archive” on page 221).
You manage the configuration data of the Management Unit using the associated Service
menu, CSR tab.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (MU) → Service, CSR
tab.
The following options are available to you:
Executing configuration data backup for the MU
Ê Click Execute configuration data backup (CSR) and confirm the action after selecting a file
archive for configuration data backup.

Fujitsu SE500 Specifications

General

Brand	Fujitsu
Model	SE500
Category	Server
Language	English