Fujitsu SE500 User Manual

Managing hardware Managing IP networks
U41855-J-Z125-3-76 261
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k10
Adding ports
Ê In the Net Unit information group click Add ports, follow the instructions of the wizard,
and select the required port.
Removing a port
Ê In the Net Unit information group click the Delete icon by the required unit and confirm
the action.
10.2.2.1 Configuring the ACL settings of the DANPU network
The ACL (Access Control List) defines the access settings for the DANPU<no>. You can
add and delete ACL entries for the DANPU<no>.
Ê Select Hardware → IP networks → Data Network Public → [<se server>(SE<model>) →]
DANPU<no>, ACL tab.
The ACL tab displays a list of the ACL settings.
Changing an ACL setting
You can:
– enable or disable an ACL and associated network access control on a network-
specific basis,
– select the ACL mode (permit or deny). In permit mode only the ports/services
contained in the ACL are permitted network access. All other services are locked.
In deny mode only the ports/services contained in the ACL are locked.
Ê In the ACL settings group click the Change icon by the required entry and enter the
new settings in the subsequent dialog box.

Fujitsu SE500 Specifications

General

Brand	Fujitsu
Model	SE500
Category	Server
Language	English