Managing hardware Managing IP networks
U41855-J-Z125-3-76 271
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k10
The following functions are available:
Displaying the MAC address
Ê In the Net Unit information group click the MAC addresses icon by the required unit.
The subsequent dialog box Display MAC addresses displays the unit's active MAC
addresses.
Adding ports
Ê In the Net Unit information group click Add ports, follow the instructions of the wizard,
and select the ports.
Removing a port
Ê In the Net Unit information group click the Delete icon by the required unit and confirm
the action.
10.2.4.1 Configuring the ACL settings of the MANPU network
You can add and delete ACL entries for each MANPU.
Ê Select Hardware → IP networks → Management Network Public →
[<se server>(SE<model>) →] MANPU, ACL tab.
v If you set permit mode and enable ACL without entering services in the list,
network access is locked for all services. For the MANPU network this means
that you, as administrator, "lock yourself out."
Proceed as described in section “Configuring the ACL settings of the DANPU network”
on page 261.
10.2.4.2 Information on the performance and utilization of the MANPU ports
An overview of the performance and utilization of the ports belonging to the public
management network is provided by the Performance tab.
Ê Select Hardware → IP networks → Management Network Public →
[<se server>(SE<model>) →] MANPU, Performance tab.
The Performance tab displays the Uplink performance view, ISL performance view and Unit
performance view tables.
Detailed information is provided in section “Information on the performance and utilization
of the DANPU ports” on page 263.
To Next Page
Loading...
Need help?
General