Fujitsu T5010 - LifeBook Tablet PC - Chapter 1: Getting to Know Your LifeBook

16
LifeBook T Series BIOS
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the
Wake Up On LAN feature, and setting the volume and video memory size.
Figure 11. Miscellaneous Configurations Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of Advanced Menu
Menu Field Options Default Description
Power Button:
■
Disabled
■
Power Off
[Disabled] Selecting Disabled disables the power button. Selecting Power Off
allows you to turn off system power with the power button.
Wake up on LAN:
■
Disabled
■
Enabled
[Disabled] Enabled allows the system to wake up when the internal LAN
device receives a specific signal while in power-off state. Selecting
Disabled disables this feature.
On Battery:
■
Disabled
■
Enabled
[Enabled] When disabled, wake up on LAN is enabled only when an AC
Adapter is connected.
Force LAN Boot:
■
Disabled
■
Enabled
[Disabled] This feature is active only when “Wake up on LAN” is enabled.
When enabled, in the event of a system wake-up on LAN, the
system will try to first boot from the LAN before attempting to
boot from any other device, regardless of the BIOS boot priority
settings or disabling of the Preboot Execution Environment.
Resume on LAN:
■
On AC Mode only
■
Always Enabled
[Always Enabled] When [On AC mode only] is selected, wake up on LAN from sleep
(standby) or hibernate state is enabled only when an AC adaptor is
connected. Note that enabling wake up on LAN from Sleep or
Hibernate depends on the OS setting.
Auto Save to Disk:
■
Off
■
On
[On] Turn on or off the Auto Save To Disk feature. When Auto Save To
Disk is turned on, at low battery state a system that is in suspend
mode will save its state to disk and then power off.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Item Specific Help
Configures the power
button.
*ACPI OS ignores this
setting.
Miscellaneous Configurations
Power Button:
Wake up on LAN:
On Battery:
Force LAN Boot:
Resume on LAN:
Auto Save to Disk:
Volume Setting:
Hardware Power Management:
Low Power Mode:
FAN Control:
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Always Enabled]
[On]
[Middle]
[Enabled]
[Disabled]
[Normal]
Phoenix SecureCore(tm) Setup Utility
Info System Advanced Security Boot Exit