To Next Page
L
Larry RhodesSep 9, 2025
What to do if the cursor does not correctly follow the pen movements on Fujitsu Q616?
- Llaura77Sep 9, 2025
Calibrate the pen.
What to do if the cursor does not correctly follow the pen movements on Fujitsu Q616?
Calibrate the pen.
Why is the battery charging indicator not lit on my Fujitsu Tablet?
The battery is not being charged. Connect the Fujitsu Tablet PC to a mains outlet using the mains adapter. Note that the battery will only be charged again when the battery capacity is less than 90%.
What to do if pen input is not working on Fujitsu Q616?
If your Fujitsu Tablet device is one which can only be operated using the pen, install the driver for the standard model. If your device is one which can be operated using the pen and by finger, install the driver for the "Dual Digitizer" model.
What to do if Fujitsu Q616 PC does not start after switch on?
If your Fujitsu Tablet PC doesn't start, the battery might be dead. Charge the battery or connect the mains adapter. Also, check whether the mains adapter is correctly connected to the Tablet PC and then switch it on.
What to do if the external monitor remains blank with Fujitsu Tablet?
If the external monitor remains blank, make sure it is switched on. If power saving has been activated, press a key or tap the touchscreen. Adjust the brightness of the monitor. Check the graphics driver settings or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". Also, ensure the power and data cables are properly connected.
How to fix incorrect date or time on Fujitsu Q616 Tablet PC?
With the BIOS-Setup-Utility, you can set the date and time in the main menu.
What to do if I lost User and/or supervisor SmartCard for Fujitsu Tablet?
If you have lost your User SmartCard, you can continue working with the Supervisor SmartCard and initialise a new User SmartCard or deactivate the SystemLock function. If you have lost the Supervisor SmartCard, you can continue working, but you no longer have all your rights and can no longer initialise a Supervisor SmartCard. If you have lost both SmartCards, you can no longer boot your system. Please contact our Service Desk. You must provide proof of ownership for the device. Then the Service Desk will refer you to our service partner, who will unlock your device (for a charge).
What to do if operating system not found on Fujitsu Q616?
Check in the BIOS Setup whether your hard disk has been set correctly. Make sure that the operating system is installed on the corresponding drive.
What to do if wireless connection to a network does not work on Fujitsu Tablet?
Switch the wireless component on. Check whether the wireless connection is switched on via the software. Further information on using the wireless component can be found in the help files.
How to solve keyboard controller error on Fujitsu Q616 Tablet PC?
Switch off your Fujitsu Tablet PC using the ON/OFF button. Wait 3 - 5 seconds and switch on the Tablet PC again.
Locates additional product information, tips, and updates on the Fujitsu website.
Explains symbols and formatting used in the manual for clarity and safety.
Identifies and describes the ports and controls located on the front of the device.
Details the ports and indicators found on the left side of the Tablet PC.
Illustrates and explains the ports and buttons located on the right side.
Locates and describes the ports and sensors on the rear of the Tablet PC.
Provides essential safety information to be followed when operating the Tablet PC.
Details safety measures for devices with integrated wireless components.
Offers guidance on how to protect the device's display screen from damage.
Provides essential tips for traveling with the Tablet PC, including country-specific advice.
Explains the correct procedures and precautions for cleaning the device.
Instructions for safely unpacking and inspecting the Tablet PC for transport damage.
Details the correct procedure for connecting the mains adapter for initial power-up.
Guides the user through the first power-on and initial software setup process.
Explains the meaning of the device's status indicators for power and wireless components.
Provides information on using the touch screen, including resolution and pixel quality.
Details how to use the pen for navigation, selection, and handwriting input.
Explains how to use the device's front and rear cameras for various functions.
Guides on inserting and removing memory cards to expand storage.
Describes wireless features like WLAN, Bluetooth, UMTS/LTE, and NFC.
Information on the optional cradle for charging and connecting peripherals.
Details on the optional Slice Keyboard for enhanced text input.
Instructions for setting up the fingerprint sensor for device access.
Guides on setting up supervisor and user passwords in BIOS for security.
Details on enabling and disabling password protection for the hard disk drive.
Information on enabling and disabling the TPM for enhanced hardware security.
Instructions for connecting external monitors via Micro HDMI, DisplayPort, or VGA.
Details on connecting various USB devices and their data transfer rates.
Guides on connecting headphones, speakers, and microphones to the device.
Explains how to access and start the BIOS Setup Utility.
Provides instructions on navigating and making changes within the BIOS Setup.
Details options for saving, discarding, or loading BIOS settings before exiting.
Covers methods for resetting the device, including forced shutdown and battery reset.
Addresses issues where the Tablet PC does not start or stops working.
Troubleshooting steps for issues with wireless network connectivity.
Guides on restoring the system to its original state under Windows 10.
Lists detailed technical specifications for the Tablet PC's hardware components.
Details screen resolutions supported for integrated and external displays.
Provides technical details for the rechargeable battery and mains adapter.
Lists technical specifications for the optional cradle accessory.
Details technical specifications for the optional Slice Keyboard.
Information on compliance with CE directives and regulations for the device.
Details FCC compliance requirements for connecting to the US telephone network.
Covers Industry Canada regulations for radio, television, and telephone equipment.
Provides FCC statements and RF exposure information for radio-enabled devices.
General