Settings in BIOS Setup Utility
Exiting B IOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Change s - save ch
anges and exit BIOS Setup Utility
► To save the c urrent menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The Tablet PC is rebooted
and the new settings come into effect.
Exit Discarding Changes – Disc ard changes and
exit BIOS S e tup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. The BIOS
Setup Utility is terminated and the Tablet PC is rebooted.
Load Setup Defaul
ts – Copy Standard Entries
► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Chang es – Discard changes without exiting
the B IOS Setup Utility
► To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setu p Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, s elect Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the B IOS Setup Utility
► To save the changes, select Save Changes an d Yes.
The changes are saved. You c an now make additional settings in the BIOS Setup Utility.
► If you want to exit BIOS Setup Utility w ith these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
60 Fujitsu
To Next Page
Loading...
Need help?
General