Connecting e xtern a l devices
DisplayPort (cradle only)
DisplayPort
The DisplayPort of the cradle c an be used to connect a d isplay, LCD TV or a plasma TV with an
appropriate port. The screen output is limited to a maximum of two external screens at the same time.
► Con nect the data cable to the
external device.
► Con nect the data cable to the DisplayPort
of the cradle.
Some LCD televisions have only two loudspeaker connections and therefore
cannot reproduce Dolby Digital or DTS. In order to reproduce the sound, you
must go into Windows and adjust the sound settings.
► To do this, deactivate the DTS Audio and Dolby Digital settin gs in the control
panel for th e Realtek HDMI Output.
VGA monitor port (cradle only)
An analogue mon
itor is connected to the analogue VGA monitor port. The screen output
is limited to a
maximum of two external scre ens at the same time.
MonitorVGA connectionsock etScreenportMonitorport
► Switch off the
Tablet PC and the
external mon
itor.
► Plug the d ata cable of the external
monitor into the monitor port.
► First sw itc
h on external monitor and
then the Ta
blet PC.
You c an
also switch back and forth between the e xternal monitor and the LCD
screen
of th e Tablet PC, see "
Touch screen", Page 23.
You ca
n display the same picture on th e external monitor and the LCD
scree
n of the Tablet PC simultaneously.
Fujitsu 55
To Next Page
Loading...
Need help?
General