En-14
00 No error No error No error
01 –– –
02 Model information abnormal Model information abnormal –
03 Microcomputer communication error Microcomputer communication error Microcomputer communication error
04 Power supply frequency abnormal Power supply frequency abnormal –
05 –– Parallel communication error
06 EEPROM access error EEPROM access error EEPROM access error
07 EEPROM deletion error EEPROM deletion error –
08 –– –
09 Compressor 1 error Room temperature thermistor error –
0A Compressor 2 error Heat exchanger thermistor (middle) error –
0b Compressor 3 error Heat exchanger thermistor (inlet) error –
0C – Heat exchanger thermistor (outlet) error –
0d Discharge temperature thermistor 1 error Blower temperature thermistor error –
0E Discharge temperature thermistor 2 error ––
0F Discharge temperature thermistor 3 error ––
10 Outdoor temperature thermistor error ––
11 Heat exchanger inlet thermistor 1 error Drain abnormal –
12 Heat exchanger inlet thermistor 2 error Room temperature abnormal –
13 Heat exchanger inlet thermistor 3 error Indoor unit fan error –
14 Heat exchanger outlet thermistor 1 error ––
15 Heat exchanger outlet thermistor 2 error ––
16 Heat exchanger outlet thermistor 3 error ––
17 Suction temperature thermistor error ––
18 –
Standard wired remote control communication error
–
19 Discharge pressure sensor error ––
1A Liquid pressure sensor error – Address setting error
1b Suction pressure sensor error ––
1C Oil sensor error – Connection error
1d –– System error
1E –– –
1F Transmission error Transmission error Transmission error
20 –– –
21 Discharge temperature 1 error ––
22 Discharge temperature 2 error ––
23 Discharge temperature 3 error ––
24 High-pressure error ––
25 Low-pressure error ––
26 –– –
27 Oil recovery error ––
28 Pump down error ––
ERROR CODE
The air conditioning system must be inspected if “E✽:✽✽” (error code) appears on the Timer and Clock Display, or the operation lamp
is flashing.
The following explains the meaning of each of the error codes.
Model code
Error code
Model code
: Outdoor unit
: Indoor unit
: Group remote controller
: Convertor
Group remote controller error
Convertor error
Outdoor unit error
Indoor unit error
Error
Code