En-13
Moving to “ REMOTE CONTROLLER SETTINGS”
To set the remote controller
Press the Set Temperature button seven times or press the
Set Temperature button
once to move to remote controller
settings.
Completing All of the Settings
To complete Settings
● When the remote controller settings and indoor unit settings are complete
Hold down again the Set Time buttons and simultaneously for two seconds or more
to complete Settings.
FINAL STEP
To apply the label
Write the name of the indoor unit or the room where it is installed on the label, and apply it to the Group remote controller.
• Consult the customer about the names to be written on the label.
• Explain to the customer about the indoor units that have been registered to each button.
Label (Standard parts)
84 × 21 (3-9/32 × 13/16)
Pressing seven times moves
to remote controller settings
Pressing once moves to remote
controller settings
To Next Page
Loading...
Need help?
General
