Fujitsu UTY-RNRUZ2 - Display Item Setting; Deadband Setting; Optimum Start Setting

Password request to the setting item On/Off is set.
(5) Touch the [Change Setting]
on the “Password Setting”
screen.
Password Setting
Change Password
Change Setting
Back
“Change Setting” screen is displayed. The screen has
3 or 4 pages which are switched by touching the [Next
Page] or [Previous Page].
Auto Off Timer [Off]
[On]
[On]
Weekly Timer
Set Temp. Auto Return
Change Setting Page 1/ 4
Cancel
OK
Next
Page
Set Temp. Range Setting [On]
[On]
[On]
Anti Freeze
Away Setting
Change Setting Page 2/ 4
Cancel
OK
Next
Page
Previous
Page
Human Sensor Setting [On]
[On]
[On]
Fan Control for Energy Saving
Initial Setting
Change Setting Page 3/ 4
Cancel OK
Next
Page
Previous
Page
Maintenance [On]
Change Setting Page 4/ 4
Cancel OK
Previous
Page
Note
Items that indoor unit does not support are not displayed.
(6) When password request item to be set or cleared is
touched, each setting screen is displayed.
(7) Touch the [On] or [Off].
(Example “Auto Off Timer”
screen)
When the [OK] is touched, the
display returns to the “Change
Setting” screen.
Auto Off Timer
Cancel OK
On
Off
Apply the setting.
(8) When setting is complete,
touch the [OK] on the “Change
Setting” screen.
(Example Page 1/4)
Auto Off Timer [Off]
[On]
[On]
Weekly Timer
Set Temp. Auto Return
Change Setting Page 1/ 4
Cancel OK
Next
Page
After the setting change screen is displayed, the display
returns to the “Password Setting” screen.
(9) When the [Back] on the
“Password Setting” screen is
touched, the display returns to
the “Initial Setting” screen.
Password Setting
Change Password
Change Setting
Back
3-8-7 Display Item Setting
(1) Touch the [Display Item Set-
ting] on the “Initial Setting”
screen.
Back
Previous
Page
Page 2/ 3 Initial Setting
R.C. Sensor
Setting
Password Setting
Display Item
Setting
Master Indoor
Unit Setting
Next
Page
Filter Sign visible/invisible
(2) “Display Item Setting” screen is displayed. Touch the
[Filter Sign] on the “Display Item Setting” screen.
(3) “Filter Sign” screen is displayed. Touch the [Visible] or
[Invisible].
(2) (3)
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp. [Invisible]
Filter Sign
Cancel OK
Visible
Invisible
When the [OK] is touched, the display returns to the
“Display Item Setting” screen.
Room Temp. visible/invisible
(4) Touch the [Room Temp.] on the “Display Item Setting”
screen.
(5) “Room Temp.” screen is displayed. Select the [Visible]
or [Invisible].
(4) (5)
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp. [Invisible]
Room Temp.
Cancel OK
Visible
Invisible
When the [OK] is touched, the display returns to the
“Display Item Setting” screen.
Apply the setting.
(6) When the setting is complete,
touch the [OK] on the “Display
Item Setting” screen.
After the setting change
screen is displayed, the
display returns to the “Initial
Setting” screen.
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp. [Visible]
3-8-8 Deadband Setting
(1) Touch the [Deadband Setting] on the “Initial Setting”
screen.
(2) “Deadband Setting” screen is displayed. Adjust the
deadband with the [
] or [ ].
When the [OK] is touched, the display returns to the “Ini-
tial Setting” screen.
(1) (2)
Back
Previous
Page
Page 3/ 3 Initial Setting
RC Master/
Slave Setting
I.U. Display
Number Setting
Deadband Setting
Optimum Start
Setting
5
°F
Deadband Setting
Cancel OK
Note
Depending on a model of the indoor unit, the deadband
is set on the indoor unit side. In this case, the Deadband
Setting is not displayed on this unit. If you want to change
the setting, consult an authorized service personnel.
3-8-9 Optimum Start Setting
(1) Touch the [Optimum Start Setting] on the “Initial Setting”
screen.
(2) “Optimum Start Setting” screen is displayed. Select the
[On] or [Off].
When the [OK] is touched, the display returns to the “Ini-
tial Setting” screen.
En-21
En-22