13
1 ) Indoor room temperature sensor switching function
The following settings are needed when use the control by wired remote
controller temperature sensor/optional sensor.
(
...Factory setting)
Setting Description Function No. Setting No.
No
42
00
Yes 01
* If setting No. is “00” :
Room temperature is controlled by the indoor unit temperature sensor.
* If setting No. is “01” :
Room temperature is controlled by indoor unit temperature sensor/remote
controller unit sensor/optional sensor.
2 ) Room temperature control switching
This setting is used to set the room temperature control method when the
wired remote controller/optional sensor is selected by the Indoor room
temperature sensor switching function.
(
...Factory setting)
Setting Description Function No. Setting No.
No
48
00
Yes 01
* If setting No. is “00” :
Room temperature is controlled by the sensors of both the indoor unit and
the wired remote controller/optional sensor.
* If setting No. is “01” :
Room temperature is controlled by the sensor of the wired remote control
ler/optional sensor.
$IWHUFRPSOHWLQJWKH)81&7,216(77,1*EHVXUHWRWXUQRIIWKHSRZHUDQG
turn it on again.
3 ) Connection state of op. sensor and Temperature sensor setting
The following settings are needed when switching the sensor. Perform
WKHVHWWLQJVLQ]RQHLQLWLDOVHWWLQJ)RUWKHGHWDLOVUHIHUWR=RQHLQLWLDO
setting".
Connection state of op. sensor
(
...Factory setting)
Optional sensor 1 Optional sensor 2
Not in use Not in use
In use In use
* If setting "Not in use" :
Optional sensor cannot be used for room temperature sensor.
* If setting "In use" :
Optional sensor can be used for room temperature sensor.
Temperature sensor setting
(
...Factory setting)
Primary controller sensor Secondary controller sensor
Disable Disable
Enable Enable
* If setting "Disable" :
Remote controller temperature sensor cannot be used.
* If setting "Enable" :
Remote controller temperature sensor can be used.
4 )
Setting record
Record the setting change in the following table.
Setting Description Setting No.
Indoor room temperature sensor
switching function
Room temperature control switching
Record the connection state of op. sensor in the following table.
Optional sensor Memo
Optional sensor 1 Not in use In use
Optional sensor 2 Not in use In use
Record the temperature sensor setting in the following table.
Controller sensor Memo
Primary controller sensor Disable Enable
Secondary controller sensor Disable Enable
11. MANAGEMENT FUNCTION
5HVWULFWVWKHRSHUDWLRQVRIIROORZLQJSRZHUVDYLQJIXQFWLRQVE\QRQDXWKRU
L]HGSHUVRQDQGKHOSVPRUHHQHUJ\HI¿FLHQWRSHUDWLRQRIWKHV\VWHP
:LWKWKHSDVVZRUGFRQWURORQO\WKHDGPLQLVWUDWRUFDQJHWDFFHVVWRWKH
function setting.
)RUWKHFRQWUROOHGIXQFWLRQVSHUIRUPWKHVHWWLQJFKDQJHLQ³0DQDJHPHQW
function” screen.
Settings Items:
Function
Economy
Set temp. auto return
Set temp. range
Timer
On timer
Off timer
Weekly timer
$XWRRIIWLPHU
(Set temp. auto return : Set temperature auto return)
(Set temp. range : Set temperature range)
)RUWKHGHWDLOVRQHDFKIXQFWLRQUHIHUWRWKHRSHUDWLQJPDQXDO
11.1. Password setting
Preset value of password is “0000”.
Change the password as necessary so that the setting change cannot be
done by other than the administrator.
The changed password should be managed properly by the administrator.
$SDVVZRUGGLJLWUHTXLUHGZKHQVHWWLQJXSD0DQDJHPHQWIXQFWLRQFDQ
be changed.
1
When [Menu button] is pressed twice while “Monitor” screen is dis
SOD\HGLWVZLWFKHVWRWKH³6XEPHQX´VFUHHQ
,I>0HQXEXWWRQ@LVSUHVVHGZKLOHWKH³6XEPHQX´VFUHHQLVGLVSOD\HG
the display returns to the “Monitor” screen.
Back:
Setting:
Date and time
Submenu
[
1/2
]
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo
10:00
2
:KHQ>,QLWLDO@LVVHOHFWHGLQ>6XEPHQX@VFUHHQ³,QLWLDO´VFUHHQis
displayed.(QWHUFXUUHQWSDVVZRUGZLWKWKH>&XUVRUEXWWRQ@DQGSUHVV
the [Enter button].
Initial
Management
Key lock select Child lock
Submenu
[
2/2
]
Mo
10:00
Back:
Setting:
Monitor
3
6HOHFW>3DVVZRUGVHWWLQJ0DQDJHPHQW@LQWKH,QLWLDOVFUHHQDQG
press the [Enter button].
Mo
10:00
Back:
Setting:
Initial
Language
English
Temp. unit
Password setting (Management)
°C
Filter sign
Management
To Next Page
Loading...
Need help?
General
