Use & Care Manual
Models SOVB - DOVB ENGLISH
12
Setting the Clock and Timer
The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the
clock displays the time 12:00
AM
.
The clock time will appear during all oven operations except when the timer or a timed cooking operation is
running.
The oven is preset to a 12-hour clock and indicates AM and PM.
To Set the Clock
1.
Press [SET CLOCK]. The hours will begin flashing
and the display will show the CLOCK writing.
2.
Press [+] or [-] to set the desired hour. Continue until
correct AM or PM is selected.
3.
Press [SET CLOCK] again to confirm the hour and
minutes will start flashing.
4.
Press [+] or [-] to set the desired minutes value, hold
the key to change by 10 minute steps.
5.
Press [SET CLOCK] again to confirm the time or wait
for 5 seconds.
The following appears when edit mode is active to set or
change the value.
To Set the Timer
1.
Press [TIMER]. The timer and TIMER writing will
appear on the display.
2.
Press [TIMER] again. The hours value will start
flashing.
3.
Press [+] or [-] to set the desired hour.
4.
Press [TIMER] again to confirm the hour and
minutes will start flashing.
5.
Press [+] or [-] to set the desired minutes value,
hold the key to change by 10 minute steps.
6.
Press [TIMER] again to confirm the value or wait
for 5 seconds.
7.
TIMER will be steadily displayed.
8.
When the time ends, reminder beeps will sound for
15 minutes or until the key is pressed.
9.
Timer format is usually HR:MIN but it switches to
MIN:SEC during the last minute.
10.
The displayed value is always rounded to the lower
minute.
To Next Page
Loading...
