Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com • 702-802-3103
12
To secure the machine during shipping, yellow zip ties are used to hold the laser head assembly and
the x-gantry. These zip ties must be removed before operating your laser cutter for the rst time.
1. Locate Yellow Zip Ties: Yellow zip ties secures the laser head and x-gantry during shipping. Open
the lid and identify all yellow zip ties.
2 .Cut and Remove Yellow Zip Ties: Using a small pair of scissors (nail cutters work remarkably well),
carefully cut and remove all yellow zip ties.
Section III. Installation & Assembly
1. Locate & Remove Zip Ties
Do not cut any other cord or wire. Be aware that the glass laser tube is
extremely fragile. Be careful NOT to damage any part of the machine during
this process.
NOTICE
Assembly Stage 1: Remove Zip Ties
To Next Page
Loading...