RetinaEngrave v3.0 Software
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
SECTION VI. SOFTWARE
Using RetinaEngrave v3.0 Software
In this section you will be introduced to the major interface features of RetinaEngrave
v3.0.
Figure 6.1
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com • 702-802-3103
46
Settings (B)
Laser: Information regarding device options.
Interface
Show or hide tooltips and other modes.
Defaults
Set image defaults with dither options.
Info: Information regarding your machine.
To Next Page
Loading...