8.12. Switching Camera Angles
Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles. You can change
the Camera Angle when appears on the TV screen.
1. During playback, press [ANGLE].
2. Use [] to select your desired angle.
• You can also change the setting by pressing [ANGLE] repeatedly.
• The selected Angle will be displayed on the display bar at the top of the TV screen.
3. Press [RETURN] to Exit.
D Note
• If “Angle Icon” setting is set to “Off”, will not appear on the TV screen.
• You can also change the Camera Angles from the Play Menu. Play Menu can be called up by pressing [MODE].
8.13. Noise Reduction
Reduces the noise of the playback picture.
1. During playback, press [MODE] to display the Play Menu.
2. Use [] to select “Noise Reduction”, then press [OK].
3. Use [] to select your desired setting.
e.g.) Blu-ray Disc™
4. Press [RETURN] to Exit.
D Note
• The setting will remain the same even if the unit is switched to Standby mode.
“On”: Activates noise reduction.
“Off”: Deactivates noise reduction.
To Next Page
Loading...
