Making Calls
Starting a call
Dial number - no correction possible
btg
Dial number
Dial call number - correction possible
atbg
Dial number
Tochangethenumberorto correctawrongentry,selectthewrongfigurewiththearrowbuttonsandpress
C to delete it. Now enter the correct number.
If you wish to conduct thecall using the handset, justlift it up after dialing the number. Any timeduring a
call you can switch back and forth between hands-free calling, speaker function and use of the handset.
Afteryouhavedialedthenumberyoucanalsopressthespeakerecallflashbuttontohavethenumberdialed
and to use hands-free calling.
If a call can not be put through (e. g. number is inhibited via thedial ranges control, or the account for the
number/MSNisempty),acorrespondingmessagewillappearinthedisplay. e.g.:»Inhibit. : dial
number«, when the dialing filter is active.
When you lift the handset and there is still no connection set up, you can pick up a waiting call using the
softkey »pick up«without replacing the handset again. You are notified ofthecallinadvance by a brief
message. Whenyou configure a connection key or a macro key you can pick up a call immediately just by
pressing that key.
Other options for dialing without lifting the handset
Theoption ofdialing withoutlifting thehandset andofcorrecting oradding to anumberalsoexists during
dialing:
•
fromthelast numberredialingmemory(seepage21).
•
fromthecaller/ memolist(seepage35).
•
fromthetelephonedirectory (seepage32).
•
fromtheVIPmemory(seepage34).
•
withthefunctionkeys(seepage66).
•
viaCTI(TAPI) features (seepage97).
Ifyouareusingoneoftheseoptions,youcanmakefurtherentriespriortoinitiatingthecall.Youcandefine
which number (MSN), if any, is to be transmitted to the party being called. You can use the Professional
Systel-Configurator to set which function is to be assigned directly to the softkey »Telephone directory«:
»Local« or »PABX«. You can reach the second function by pressing the R (Recall flash) key.
Making Calls
18
To Next Page
Loading...
Need help?
General
