t
O
Enter the date and press OK to confirm. Set time
Date>29.05.06__
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Call filter
Thecallfilterallowsspecificcallstobeputthroughorrejectedonthebasisoftherecognizedphonenumber.
You can enter up to five filter numbers (26 digits max. ) for the call filter. Filter numbers can be local area
codes or partial or complete numbers.When you enter»****«you can include callswhichdo not trans
-
mitthenumber(callerID)inthecallfilter.Usingthecallfilter,callswhosenumbers,orbeginningnumbers
concur with the filter numbers entered in the system, can be rejected or accepted.
Rejectedcallsare savedinthecallerlistwithaspecialflag.Ifthecallwas onlysignaledat yourtelephonethe
callerwillhear thebusysignal whenthecall is rejected bythe call filter. Ifyouare a memberofa team, then
this call will continue to be signaled at the phones of your team.
Call filter operating modes
»No« Allcallssignaled.
»reject« Callswhosenumbers,orbeginningnumbersconcurwithstoredfilternumberswillbe
rejected.Allothercallsaresignaled.
»forward« Callswhosenumbers,orbeginningnumbersconcurwithstoredfilternumberswillbe
signaled.Allothercallsarenotsignaled.
» All calls« Nocallsaresignaled.
Programming filter numbers
Youcanconfigureanewfilternumber,oruseanumberalreadystoredinthetelephone(redialing,telepho-
ne directory, VIP or speed dialing memory).
The following example describes how to enter a new filter number.
Begin as follows:
a
Ms>s s<>O s
Set
-
ting
Filter New
Select filter number
New
t
O
Enter the filter number. In this example:
»012345«.
Confirm your entry with OK.
Enter filter no.
>012345_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Programming call filter operating modes
Begin as follows:
a
Ms>ss
Setting Filter Incoming
Settings
72
To Next Page
Loading...
Need help?
General
