6
Installation
1.5”
1.5” 1.5”
1”
z The TV emits heat when in operation. Do not
place covers or blankets on the unit because this
may cause overheating. Do not block ventilation
holes, or set up near radiators. To provide suffi-
cient ventilation leave 1.5 inches (4 cm) free space
around the entire unit.
z Avoid mounting the TV on a cabinet or cart
smaller than the length of the TV. Doing so could
cause the TV to tumble over, increasing the risk of
personal and possibly fatal injury. This also could
cause serious damage to the product.
z Ensure the cabinet is strong and large enough
to support the TV .
z Place the TV away from direct sunlight.
z An optional wall mount can be used with your
Furrion TV. Consult with your local dealer for a wall
mount that supports the VESA standard used by
your TV model. Carefully attach the wall mount
bracket at the rear of the TV. Install the wall mount
bracket on a solid wall perpendicular to the floor.
z Make sure to use screws and wall mounts that
meet the VESA standard.
z Please refer to the table below to ensure the
correct size VESA mount is used with the TV
z Furrion recommends installation be carried out
by professionals. Improper installation may cause
personal injury and damage to the TV.
z If you are attaching the TV to other building
materials, please contact qualified personnel to
install the wall mount. Detailed instructions will
be included with the wall mount.
z Place the TV away from areas where it may get
wet or be affected by condensation.
z When moving TV set, turn off the power and unplug
any connecting cables. At least two people should
move the larger screen TVs to avoid personal injury
and damage to the TV.
z Do not install the LCD Panel near electronic
equipment that produces electromagnetic waves.
Some equipment placed too near this unit may
cause interference.
TV MODEL WIDTH mm HEIGHT mm Screw Size
FEHT32N8A 200 100 BM6*10mm
FEHT39N8A 200 200 BM6*10mm
VESA MOUNTING PATTERN
z This Furrion TV comes fitted with a standard 12V cigarette adapter. If the TV is to be run from a conventional
110-220V power supply, please use the power adaptor provided.
Power
To Next Page
Loading...
