FURUNO
MODEL 1835 series
SP - 3 E3579S01E-M
5 INTERFACE
5.1 Heading signal AD-10 format or NMEA0183
5.2 NMEA 2 ports, NMEA0183 Ver-1.5/2.0/3.0
5.3 Remote display/ Ext. buzzer 1 port (option)
5.4 USB 1 port, USB2.0 for maintenance
5.5 Input data sentences ALR, BWC, BWR, DBT, DPT, DTM, GGA, GLL, GNS, GSA, GSV,
HDG, HDT, HDM, MTW, MWV, RMB, RMC, TTM*, VDM, VHW,
VTG, VWR, VWT, XTE, ZDA
*: data from radiotelephone only
5.6 Output data sentences RSD, TLL, TTM (requires ARP-11)
6 POWER SUPPLY
6.1 MODEL 1835 12-24 VDC: 4.1-2.0 A
6.2 MODEL 1935 12-24 VDC: 6.8-3.3 A for 24 rpm, 8.2-3.8 A for 48 rpm
6.3 MODEL 1945 12-24 VDC: 7.3-3.5 A for 24 rpm, 8.8-4.1 A for 48 rpm
6.4 Rectifier (option)
PR-62 (MODEL 1835) 100/110/220/230 VAC, 1 phase, 50/60 Hz
RU-3423 (MODEL 1935 and MODEL 1945)
100/110/115/220/230 VAC, 1 phase, 50/60 Hz
7 ENVIRONMENTAL CONDITION
7.1 Ambient temperature
Antenna unit -25°C to +55°C
Display unit -15°C to +55°C
7.2 Relative humidity 93% at 40°C
7.3 Degree of protection
Antenna unit IP26
Display unit IP55
7.4 Vibration IEC 60945
8 COATING COLOR
8.1 Antenna unit N9.5
8.2 Display unit N2.5
9 COMPASS SAFE DISTANCE
9.1 Antenna unit
MODEL 1835 Standard: 0.90 m, Steering: 0.70 m
MODEL 1935/ MODEL 1945 Standard: 1.00 m, Steering: 0.75 m
9.2 Display unit Standard: 0.45 m, Steering: 0.30 m
To Next Page
Loading...
