Furuno 1835 - How to Select the Alarm Type; How to Sleep a Target Alarm Temporarily

1. DESCRIPTION OF OPERATION
1-23
1.19.3 How to select the alarm type
You can set the target alarm to activate against targets entering or exiting the alarm
zone.
In and Out target alarms
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Alarm] and press the ENTER key.
Alarm menu
3. Use the Cursorpad (S or T) to select [Target Alarm 1] or [Target Alarm 2] then
press the ENTER key.
Target Alarm options
4. Use the Cursorpad (S or T) to select [In] or [Out].
[In]: When the targets enter a target alarm zone, the alarm sounds.
[Out]: When the targets exit a target alarm zone, the alarm sounds.
5. Press the ENTER key followed by the MENU key.
1.19.4 How to sleep a target alarm temporarily
When you do not require a target alarm temporarily, you can sleep the target alarm.
The alarm zone remains on the screen, but any targets that enter (or exit) the alarm
zone do not trigger the audio and visual alarms.
1. Press the TARGET ALARM key to select the ALARM 1 or ALARM 2 indication at
the upper-right corner on the screen. The selected indication is in a rectangle.
“In” target alarm
“Out” target alarm