1. MOUNTING
1-12
1.3 Power Supply Unit
The Power Supply Unit PSU-007 does not contain usual operating controls. Therefore, it
can be installed in any recessed place either in vertical or horizontal position. (For the
console mount display unit, the PSU-007 can be installed inside the console.) However,
select a dry and well-ventilated location and observe the compass safe distance to prevent
deviation of a magnetic compass. See page ii.
1. Open the cover of the power supply unit.
2. Fasten the unit to chosen location with four self-tapping screws 5x20.
3. After connecting cables, attach the cover.
11
130
#30
#30
CABLE ENTRY
126
110
FIXING HOLES
4- 6
To Next Page
