EasyManua.ls Logo

Furuno BACK GP-80 - Deleting Route Waypoints

Furuno BACK GP-80
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4–6
Figure 4-15 Route editing screen
5) If required, press to enter the speed by
which to calculate time-to-go.
6) Press t or s to select Auto or Man.
Auto: Current average speed is used to
calculate the time-to-go. Manual: Entered
speed is used to calculate the time-to-go.
Enter speed and press .
Route waypoints may be registered two ways:
entering waypoint nubmer directly or through
the route editing screen. Follow 1 or 2 be-
low.
11
11
1
Entering waypoint number directly
7) Enter waypoint number, in three digits.
The cursor shifts to the "Skip" window.
The procedure for skipping a waypoint is
shown on page 5-4. For now, go to the
next step.
8) Press to continue. If the waypoint en-
tered in step 7 does not exist, you are in-
formed that the waypoint does not exist
and entry is cancelled.
9) Enter other route waypoints by repeating
steps 7 and 8.
10)Press [MENU ESC] to finish.
22
22
2
Using previously registered waypoints
Enter waypoints in the order they will be tra-
versed; not by waypoint number order.
7) Press [
]. The reverse video on the
waypoint on route planing screen
disapperars.
8) Press or to select waypoint number.
9) Press the [NU/CU ENT] key. Selected
waypoint number appears on the route
editing screen. The distance and time-to-
go indications to the first waypoint entered
are blank.
10)To enter other route waypoints, repeat
steps 8 and 9.
11)Press the [MENU ESC] key to finish.
Note: To return to the route editing screen, press
[
].
4.5 Deleting Route Waypoints
1) Press [WPT RTE] and [5] to display the
route list.
2) Press or to select route.
3) Press s to display route editing screen.
4) Select the waypoint to delete.
5) Press the [CLEAR] key.
6) Press the [NU/CU ENT] key.
7) Repeat steps 4 through 6 to continue de-
leting waypoints.
8) Press the [MENU ESC] key. The route is
rearranged to reflect the change.
34° 12.345' N 130° 23.456' E
MARINE POINT
001
ROUTE : 01 (In Use , REVERSE)
ENT: Enter
MENU: Escape
: RTE WPT
36° 12.345' N 135° 23.456' E
A POINT
002
AUG 12' 95 12 : 35U
AUG 13' 95 13 : 45U
skip Distance TTG
Trial Speed : Auto Man (012.0kt)
01
EN
02
EN
CLEAR: Delete
Use: In use
Fwd: Traverse waypoints in forward order
Rvs: Traverse waypoints in reverse order
Waypoint
list
Route
editing
screen
nm
.
D M H
nm
.
D M H

Table of Contents

Related product manuals