Furuno BACK GP-80 - 5.2 Cancelling Destination

5–5
Skipping route waypoints
You may skip route waypoints by displaying
"DI" (DIsable) next to the route waypoint in
the route list. Using Figure 5-14 as an ex-
ample, your ship is currently heading toward
waypoint 04 but is to switch course and head
to waypoint 03. In this case you would want
to skip waypoint 04.
Figure 5-14
1) Press [WPT RTE] and [5] to display the
route list. Press the cursor keys to select
route.
Figure 5-15 Route list
2) Press ▲ or ▼ to select route waypoint to
skip.
3) Press t or s to shift the cursor to the
right of the waypoint number.
4) Press [
] to change "EN"(ENable) to
"DI"(DIsable).
5) Press the [NU/CU ENT] key.
To reselect the waypoint, select it on the route
list and press [
] to change "DI" to "EN".
5.2 Cancelling Destination
1) Press the [GOTO] key.
2) Press [5] to select Cancel. The message
shown in Figure 5-16 appears.
Figure 5-16
3) Press the [NU/CU ENT] key.
Release GOTO ?
ENT:Yes MENU:No
,,
,,
,,
,,
,,,
,,,
,,,
,,,
Waypoint 03
Waypoint 05
Port A
Port B
Waypoint 01
Waypoint 02
Waypoint 04
Waypoint 06
New course
ROUTE :01
ENT:Enter
MENU:Escape
(In Use, REVERSE)
skip Distance TTG
001
003 36° 12.345' N 135° 23.456' E
A POINT APR 10' 95 13:45U
: RTE WPT
CLEAR: Delete
Trial Speed Auto Man (012.0kt)
01 0 04 EN
02 0 03 EN 345.67nm 2D 12H 34M
34° 12.345' N 130° 23.456' E
MARINE POINT APR 10' 95 12:35U
004
01
0
"EN" indicates waypoint
is enabled. Display "DI"
to skip waypoint.
nm
D M H