Furuno CH-270 - Page 10

viii
Hull Unit Shipped Configuration (CH-184-270)
Name Type Code No. Qty Remarks
CH-1841-1 — 12 VDC
Control Box
CH-1841-2 —
1 set
24 VDC
CH-1842-1 —
Raise/Lower
Drive Assy.
CH-1842-2 —
1 set See Raise/lower drive assy.
CH-1812-1-52 — 5.2 m
CH-1812-1-80 — 8 m
12 VDC
CH-1812-2-52 — 5.2 m
Train/Tilt Assy.
CH-1812-2-80 —
1 set
8 m
24 VDC
Soundome (D)
Assy.
CH-1813 006-541-420 1
Main Body
Flange Assy.
CH-1844 006-573-720 1 set Flange, Grease cotton
CH-1845-11 006-546-380 Shaft length 1.17 m
Assembling Kit
for Field
CH-1845-22 006-546-410
1 set
Shaft length 2.2 m
See
next
table
06-008-1021 100-028-500 1.17 m
Main Shaft
SHJ-0006-1 661-000-061
1
2.2 m
Sonar Oil 4-liter can 000-824-033 1
Installation
Materials
CP06-00403 006-573-730 1
For CH-184-270, includes
Ground plate WEA-1004
(Code No. 006-543-980)
Cable assy. 06S4054
(Code No. 000-122-879)