Furuno CSH-8LMARK-2 - 1.8 DC-AC Inverter (option)

1. MOUNTING
1-18
1.7.2 Mounting procedure
Orient the FORE mark on the unit toward the ship’s bow and mount the unit within 5°
of horizontal in all directions. For the offset, see Chapter 3.
Mounting the motion sensor MC-100
1.8 DC-AC Inverter (option)
The optional DC-AC inverter is required when the ship’s mains is 24 VDC. The DC-
AC inverter should be mounted on a bulkhead (weight of unit: 15 kg) with sufficient
vibration. Install the unit so that the cable entrances are facing downward.
DC-AC inverter
FORE
AFT
≤ 5°
53 105 105 75
285
6×ø9
Mounting hole